B.R.S. Construction Inc.
PENE-GROUTÆ
Link to Explanation | Link to Material Specifications
Home | About Us | Client List | PENE-GROUTÆ | Contact Us
What are PENE-GROUTÆ's Physical Characteristics?
Properties
Physical Characteristics
Chemical Test Data
Change in Viscosity Graph by
Temperature
Change in Gelation Graph by
Concentration
Change in Gelation Graph by Temperature
Time Dependent Change in
PENE-GROUTÆ Viscosity
|
| Concentration % PENE-GROUTÆ/Water |
Modulus of Elasticity |
Elongation | Adhesion-Tensile (psi) Strength |
| 5/95 | 1.4 | 30 | 11.4 |
| 10/90 | 4.3 | 70 | 21.3 |
| 20/80 | 18.5 | 165 | 49.8 |
| 30/70 | 31.3 | 150 | 39.8 |
| 40/60 | 45.5 | 115 | 42.7 |
| 50/50 | 46.9 | 95 | 49.8 |
| 70/30 | 44.1 | 40 | 49.8 |
| Waste Material | % In Solution of Water |
Reaction |
| Potassium Chromate Hydrochloric Acid Ammonium Hydroxide Sodium Hydroxide Cupric Sulfate Ammonium Chloride Toluene Benzene Trichloroethylene Phenol Gasoline (Unleaded) Oil (SAE 30) |
10% 10% 10% 10% 10% 10% Saturated Saturated Saturated Saturated Saturated Saturated |
Gelled Gelled Gelled Gelled Gelled Gelled Gelled Gelled Gelled Gelled Gelled Gelled |
| QUALIFICATION: This information is based upon laboratory testing which we believe to be complete and reliable. However, since we have no direct control over installation, the user must determine the material's suitability for his particular use. PENE-GROUTÆ of North America warrants that the materials supplied are manufactured to the highest quality standards to meet our published specifications and that we will replace without charge to the user any materials which are found to be defective. We make no other express or implied warranty and shall not be liable for consequential or indirect damage from the use of our products. |
Change in Viscosity Graph by
Temperature
Change in Gelation Graph by Concentration
Change in Gelation Graph by Temperature